Thor's Lightning Air Hose Quick Disconnect Kit - Thor's Lightning Adventure Systems – Thor's Lightning Air Systems add wishlist add wishlist show wishlist add compare add compare show compare preloader
Thor's Lightning Air Compressor - 12V Quick Disconnect Kit 4 Gauge Wire
Thor's Lightning Air Compressor - 12V Quick Disconnect Kit 4 Gauge Wire
Thor's Lightning Air Compressor - 12V Quick Disconnect Kit 4 Gauge Wire
Thor's Lightning Air Compressor - 12V Quick Disconnect Kit 4 Gauge Wire
Thor's Lightning Air Compressor - 12V Quick Disconnect Kit 4 Gauge Wire
Thor's Lightning Air Compressor - 12V Quick Disconnect Kit 4 Gauge Wire
Thor's Lightning Air Compressor - 12V Quick Disconnect Kit 4 Gauge Wire
Thor's Lightning Air Compressor - 12V Quick Disconnect Kit 4 Gauge Wire
Thor's Lightning Air Compressor - 12V Quick Disconnect Kit 4 Gauge Wire
Thor's Lightning Air Compressor - 12V Quick Disconnect Kit 4 Gauge Wire

Thor's Lightning Air Compressor - 12V Quick Disconnect Kit 4 Gauge Wire

Thor's Lightning 5 Year Warranty & 30 Day Price Match Guarantee

Elevate your air compressor setup with Thor's Lightning 12V Quick Disconnect Kit. This DIY assembly kit allows hardwiring into your vehicle, ensuring easy removal when needed. Designed for versatility, it pairs seamlessly with The Refuge MOLLE Air Compressor Storage Mount. The kit includes durable 4-gauge copper wiring, pole connectors for quick-disconnect, battery post terminals, and a waterproof 150 battery post-mounted fuse block for added safety. Note: Professional installation is recommended. Upgrade your compressor system with this reliable and versatile Quick Disconnect Kit.

Product SKU: QDK001
Availability:
In stock
Low stock
Pre-Order
Out of stock
$29.99
Hurry! Only 2 left in stock
Wire Length
Notify me When Available
You will receive an email when the product is available.

WHAT IS THE THOR'S LIGHTNING AIR COMPRESSOR - 12V QUICK DISCONNECT KIT?

The Thor's Lightning Quick Disconnect Wiring Kit is designed to allow the Thor's Lightning Bolt True Dual 12v Portable Air Compressor to be hardwired into a vehicle and yet easily removable if needed (for example, taking the top on and off). The Quick Disconnect Wiring Kit is designed to be used with any vehicle, and can be used with The Refuge MOLLE Air Compressor Storage Mount. Includes a 3-year warranty against manufacturing defects. 

WHAT IS INCLUDED IN THE QUICK DISCONNECT KIT?

The kit comes with different length options of durable rubber insulated copper wiring (4 gauge) MADE IN THE USA, one set of pole connectors, a pair of terminals for connection to battery posts, and a 150 amp fuse box for added safety.

NOTE: PROFESSIONAL INSTALLATION IS RECOMMENDED FOR HARDWIRING THE THOR'S LIGHTNING BOLT TRUE DUAL COMPRESSOR INTO YOUR VEHICLE. THOR'S LIGHTNING IS NOT RESPONSIBLE FOR VEHICLE DAMAGE ARISING FROM INSTALLING EQUIPMENT UTILIZING THIS WIRING KIT.

WIRING KIT COMES ASSEMBLED. YOUR AIR SOURCE (COMPRESSOR) MAY REQUIRE MODIFICATION TO WORK WITH THIS KIT. 

  • Durable rubber insulated 4 gauge copper wiring (choose from length options!)
  • One set of 120A pole connectors for quick-disconnect functionality
  • One pair of wire terminals for connection to battery posts
  • Waterproof 150 battery terminal mounted fuse block
  • Can be used with the Refuge MOLLE Air Compressor Storage Mount
  • Includes a 3-year warranty against manufacturing defects. 

 

We value your satisfaction with Thor's Lightning Air Systems and its products. If you aren't satisfied with your product, we want to make it right.

Our refund and returns policy lasts 90 days. If 90 days have passed since your purchase, we can’t offer you a full refund or exchange.

To be eligible for a return, your item must be returned with all components that were included in the order.

To complete your return, we require a receipt or proof of purchase.

Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.

If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.

Late or missing refunds

If you haven’t received a refund yet, first check your bank account again.

Then contact your credit card company, it may take some time before your refund is officially posted.

Next contact your bank. There is often some processing time before a refund is posted.

If you’ve done all of this and you still have not received your refund yet, please contact us at returns@thorslightning.com.

Sale items

Only regular priced items may be refunded. Sale items cannot be refunded.

Shipping returns

To return your product, you should mail your product to: 419 Adams Ave #1, Albert Lea, MN 56007

You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you may vary.

If you are returning more expensive items, you may consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

Need help?

Contact us at returns@thorslightning.com for questions related to refunds and returns.

Duration: 3 years from the date of purchase by the original Purchaser.

Limited Warranty:

  1. Who gives this warranty (Warrantor): Thor’s Lightning, LLC, 419 Adams Ave #1, Albert Lea, MN 56007. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
  2. What products are covered by this warranty: Thor’s Lightning Air System tire pressure inflation/deflation/equalization device and/or Thor’s Lightning Compressor Mounting Bracket and/or Thor's Lightning Air Compressors.
  3. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
  4. What is not covered under this warranty:
    1. The cost of labor to make repairs or replacements
    2. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
    3. Any damage caused by using equipment beyond rated capacity and/or capability
    4. Items or service normally required to maintain the product.
    5. Items considered general wear parts such as hoses, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
    6. Any component damaged in shipment or any failure caused by installing or operating equipment under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
    7. Any component failure caused by rain, excessive humidity, corrosive environments or other contaminants
    8. Worn components due to improper maintenance or corrosive environments
    9. Cosmetic defects that do not interfere with product functionality
    10. Damage due to incorrect voltage or improper wiring
    11. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of a Thor’s Lightning product
  5. Responsibilities of Warrantor under this warranty: Repair or replace with either new or reconditioned unit at Warrantor’s option, component and/or unit which is defective, has malfunctioned and/or failed to conform within duration of the warranty period.
  6. Responsibilities of Purchaser under this warranty:
    1. Provide dated proof of purchase and maintenance records
    2. Freight costs must be borne by the Purchaser.
    3. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
  7. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.

Limitation of Liability: Thor’s Lightning shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other than an authorized representative of Thor’s Lightning has made any attempt to service or modify the tool prior to its return to Thor’s Lightning under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages Thor’s Lightning products are provided and sold as is without any express or implied warranties including warranties of merchantability or fitness for particular purpose. No warranties, expressed or implied, will apply after this period. Thor’s Lightning may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on Thor’s Lightning website. Such revised terms shall be effective thirty days from the date of such written notice or posting.

Thor’s Lightning Air Systems

Setup & Support

Find quick-start instructions, installation videos, troubleshooting help, and product support for your Thor’s Lightning air system.

What do you need help with?

Choose your product below. Each section includes a video, simplified steps, and key setup notes.

Lightning Strike Compressor

Operation, TotalControl mode, manual mode, and error codes.

View Compressor Instructions

Rapid 4-Tire System

Inflation, deflation, tire equalization, and setup.

View 4-Tire Instructions

Standard Hammer Manifold

Manual inflation and deflation using the manifold valve. No preset PSI or auto shutoff.

View Standard Manifold Instructions

TotalControl Hammer Manifold

Preset PSI inflation and deflation using the electronic TotalControl manifold.

View TotalControl Instructions

Mounts & Bed Rack

JKU compressor mount and Refuge Modular Bed Rack install videos.

View Install Videos

Lightning Strike Compressor

Compressor Manual

Quick Start

  1. Connect the air hose to the compressor using the quick-connect fitting.
  2. Connect the Thor’s Lightning Dynamo chuck to the valve stem.
  3. Connect the power clamps to the vehicle battery and start the engine.
  4. Set desired pressure using the “+” or “–” buttons, then wait for the display to stop blinking.
  5. Press the power button to begin inflation. The compressor will stop automatically at the preset pressure.
Manual Mode: For small-volume items like bicycle tires, motorcycle tires, rafts, paddleboards, air mattresses, or other inflatables, use manual mode and monitor pressure closely.

Operating Modes

TotalControl™ Mode
Best for vehicle tires. Set your desired PSI, press power, and the compressor automatically stops when the preset pressure is reached.
Manual Mode
Best for small items and fast-fill situations. Press power to start inflation and press power again to stop. Always monitor closely to avoid overinflation.
Normal Pausing
The compressor may stop briefly for 1–2 seconds, 2–4 times during inflation. This is normal pressure calibration.

Error Codes

HOT
Overheat protection

Allow the compressor to cool before restarting.

ERR
Leak detected

Check hose, fittings, and valve connection.

F02
Overcurrent protection

Input current is greater than 120A. Check power connections and load.

F03
Overpressure protection

Pressure is greater than 155 PSI. Reduce pressure and restart.

F04
Temperature sensor failure

Sensor may be loose or damaged. Contact support.

F05
Pressure sensor failure

Sensor may be loose or damaged. Contact support.

F06
Overvoltage protection

Input voltage is greater than 16V. Check vehicle electrical system.

F07
Low voltage protection

Input voltage is lower than 12V. Start engine or check battery.

Installation & Product Videos

Watch the correct video for your product before installation or use.

Jeep Wrangler JKU Compressor Mount

Mount Install

Before You Start

  1. Confirm you have the correct mount for your Jeep Wrangler JKU.
  2. Lay out all hardware before beginning installation.
  3. Watch the full video once before tightening final hardware.
  4. After installation, verify the compressor and mount are secure.

Refuge Modular Bed Rack

Bed Rack Install

Install Notes

  1. Identify all rack components and hardware before assembly.
  2. Loosely install hardware first, then square the rack.
  3. Tighten hardware evenly once everything is aligned.
  4. Recheck hardware after your first drive.

Standard Hammer Manifold

Manual Manifold

Standard Hammer Manifold

Important: The Standard Hammer Manifold is fully manual. It does not have preset PSI, automatic shutoff, or electronic inflation/deflation control.

To Inflate
  1. Unpack hoses and orient the manifold so it is accessible for your air source.
  2. Connect the hose sections to the manifold using the quick-connect couplers.
  3. Make sure the valve is closed before connecting to the tires.
  4. Connect the tire chucks to the valve stems and make sure there are no kinks in the hoses.
  5. Connect the manifold to your air source.
  6. Open the manifold valve before turning on your air source.
  7. Turn on your air source and inflate the tires.
  8. Turn off the air source to check pressure with your gauge.
  9. Repeat as needed until desired tire pressure is reached.
  10. Leave the system connected for 10–15 seconds with the valve closed to help equalize pressure across all connected tires.
To Deflate
  1. Unpack hoses and orient the manifold so it is accessible.
  2. Connect the hose sections to the manifold using the quick-connect couplers.
  3. Make sure the valve is closed before connecting to the tires.
  4. Connect the tire chucks to the valve stems and make sure there are no kinks in the hoses.
  5. Open the manifold valve to begin deflation.
  6. Close the valve to check pressure with your gauge.
  7. Repeat as needed until desired tire pressure is reached.
  8. Leave the system connected for 10–15 seconds with the valve closed to help equalize pressure across all connected tires.
No Preset PSI: Do not look for a target pressure setting on the Standard Hammer Manifold. You control inflation and deflation manually by opening/closing the valve and checking pressure with a gauge.
Important: Open the manifold valve before running your air source. Failure to open the valve may cause back pressure and may damage your compressor.

TotalControl Hammer Manifold

Preset PSI Manifold

TotalControl Hammer Manifold

Important: The TotalControl Hammer Manifold is the electronic manifold with preset PSI inflation/deflation. This is separate from the Standard Hammer Manifold shown in the video above.

To Inflate
  1. Unpack hoses and orient the manifold so it is accessible for your air source.
  2. Connect the controller to an air source, such as an air compressor or air tank.
  3. Connect the controller to the tires using the air hoses.
  4. Press the power button to turn the controller on.
  5. Set the desired PSI using the “+” or “–” buttons.
  6. Open the manual valve and turn on the air source to begin inflation.
  7. The process may pause 2–4 times for pressure calibration.
  8. When desired pressure is reached, the controller will close the internal electronic valve and beep.
  9. Turn off the air source.
  10. Disconnect hoses from the tires, then disconnect the air source and turn off the controller.
To Deflate
  1. Connect the controller to the tires using the air hoses without connecting an air source.
  2. Press the power button to turn the controller on.
  3. Set the desired PSI using the “+” or “–” buttons.
  4. Open the manual valve to begin deflation.
  5. The controller may pause a few times for pressure calibration.
  6. When desired pressure is reached, the controller will close the internal electronic valve and beep.
  7. Close the manual valve and disconnect the hoses from the tires.
After target pressure is reached, the electronic valve may remain closed for 120 seconds and beep. Disconnect hoses and air source within this time.

Rapid Multi-Tire 4-Tire System

Inflation / Deflation

Rapid System Basics

To Deflate
  1. Unpack and orient hoses so the manifold is accessible.
  2. Connect hose sections to the manifold couplers.
  3. Connect tire chucks to valve stems and avoid hose kinks.
  4. Open the valve to deflate, then close to check pressure.
  5. Leave connected for 10–15 seconds with valve closed to equalize pressure.
To Inflate
  1. Unpack and orient hoses so the manifold is accessible.
  2. Connect hose sections to the manifold couplers.
  3. Connect tire chucks to valve stems and avoid hose kinks.
  4. Connect manifold coupler to the air source.
  5. Open the valve before turning on the air source.
  6. Inflate, then turn off air source to check pressure as needed.
  7. Leave connected for 10–15 seconds with valve closed to equalize pressure.
Important: Open the air valve before running the air source. Failure to open the valve may cause back pressure.

Need Help?

If you have a problem, contact Thor’s Lightning directly before returning your product to the retailer. We’ll help you get it solved faster.

Customer Reviews

Based on 20 reviews
100%
(20)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Michael Goodman
Love it

Absolutely love it man ! Great product, love the customer service, I don’t leave reviews often but have to give a shout to this ! Hoping you come up with an under the hood mount for the ford bronco !

S
Stephen Ostaff
Solid product

I was looking for a compressor that didn't cost $1200 with an install kit and require open heart car surgery. These double compressors sold by Thor, EZ Flate, Napa, and MorrFlate work well. There's tons of videos online showing people modifying them to add pressure cut off switches. My objective was to soft install the compressor in a toolbox in the back of my truck and wire it to my battery with Anderson connectors. Little did I know that Thor makes all the parts and pieces to do exactly that and I was not the first to have this idea. When I saw their mounts and wiring kits, I ordered the compressor and the wiring kit. To my surprise the Thors model comes with a pressure cut off already. I loomed and cut the wire kit to length, ran it through the truck, cut a hole in the top of the bed wall and ran the + and - through a firewall gasket and screwed the Anderson plug to the toolbox. Worked out great. It airs up my four 33.5" tires from 16 psi to 36 psi in 3:35 using a 4 hose manifold kit. Very happy with the product.

Hi there, thank you for your thorough review and for choosing our Thor's Lightning Air Compressor. We are glad to hear that you are satisfied with the product and that it met your expectations. Our goal is to make high-quality and affordable compressors for our customers, and we are happy to know that you found our product to be a solid choice. Thank you for mentioning our pressure cut off feature, it's always great to hear positive feedback on our products. We appreciate your support and hope to continue providing you with great products and service. Have a great day!

M
Mark Miller

Thor's Lightning Air Compressor - 12V Quick Disconnect Kit 4 Gauge Wire

D
Deana Buntin
Thor's Lightning Set Up

We have been buying the Thor's Lighting System in bits and pieces for 2 Jeeps after winning a gift card at a children's cancer charity event in Oklahoma. We began the installation set up and have completed it for one of the Jeeps and man the ease of air down and air up is a GAME CHANGER for us! We are older and the ease of use to attach and operate is fantastic. The time it takes from the manual process is amazing. We are so glad we made this change over to this product.

Hi there, thank you so much for your review! We are thrilled to hear that you are enjoying the Thor's Lightning Set Up and that it has been a game changer for you. We are honored to be a part of your Jeep adventures and we hope that our product continues to make your air down and air up process easier and quicker. Thank you for choosing our product and for supporting a great cause. Happy trails!

D
Don Davison
2 door bronco

Got it wired up and ready for my next run