Jeep® Rapid Tire Inflation System Compressor + 4-Tire Kit ⭐ MOST POPULAR JEEP SETUP
The Jeep® Licensed Thor’s Lightning Strike Air System Bundle gives Jeep owners a complete, trail-ready tire inflation solution. The powerful dual compressor features TotalControl™ automatic PSI shutoff, active cooling fans that help it run up to 40°F cooler, heavy-duty 4-gauge wiring, and a 75% duty cycle for reliable air-ups after demanding trail runs.
Use the included single tire hose for quick air-ups or connect to a multi-tire system to inflate all four tires faster after the trail.
Comparing compressors? See how the Lightning Strike compares →
Jeep® Rapid Tire Inflation System
Compressor + Rapid Multi-Tire Air System
What’s Included
- Jeep® Licensed Thor’s Lightning Strike Dual Air Compressor
- Jeep Multi-Tire Inflation Air System
- Heavy-Duty Carrying Bag
- Single Tire Inflation Hose
- Heavy-Duty Power Leads with Battery Clamps
- Quick-Connect Fittings and Storage Accessories
Everything you need to air up your Jeep after the trail — designed for fast, reliable tire inflation whether you're airing up one tire or all four. From recalibration at elevation to simultaneous four-tire inflation, this bundle is engineered for serious explorers.
Trail-Proven Performance. Complete Jeep® Control.
When adventure calls, you need more than just gear -- you need a complete air system. The Jeep® Lightning Strike Bundle delivers the ultimate combination of precision inflation, rugged durability, and all-four-tire control. Built for Jeep® vehicle owners who demand reliability under pressure, this bundle pairs the Lightning Strike Compressor with the Rapid Multi-Tire Air System for unmatched performance on and off the trail.
Why This Bundle
Tire pressure is mission-critical in the backcountry. This two-part system ensures fast, accurate air-up in any terrain, with heritage-inspired details that honor Jeep® history.
Key Features
Jeep® Lightning Strike Compressor
ZeroOut™ Calibration: Recalibrate PSI at elevation for accurate readings anywhere.
TotalControl™ Digital Interface: Set your target PSI, monitor in real time, and let the system auto shutoff.
Voltage Monitoring: Real-time battery display ensures smarter operation.
Enhanced Cooling System: Redesigned airflow lowers cylinder temps by 30°F and motor temps by 40°F.
75% Duty Cycle with 45-Minute Runtime: Power through RV tires, trailers, or air tools without cooldown delays.
Heavy-Duty Portability: Rugged carry bag with reinforced zippers.
Flexible Power Options: 120A Anderson plug and 9-foot heavy-duty battery clamp cable.
Vehicle Mount Compatible: Works seamlessly with Refuge MOLLE Mount Systems.
Jeep® Rapid Multi-Tire Air System
Hammer Manifold: Digital gauge, ball valve, and I/M quick disconnects, finished with the Jeep® Star Heritage Mark™.
CoolTouch™ Braided Hoses: Stay flexible and safe to handle in any weather.
High-Flow Design: Oversized fittings maximize airflow for faster fill times.
Fast Connect: Premium quick disconnects speed up setup and teardown.
Field-Ready Storage: MOLLE-compatible heavy-duty zippered bag for rugged transport.
Ideal For
Jeep® owners who want faster trail air-ups
Jeep® vehicles and 4x4 rigs
RV, trailer, and commercial tire inflation
Overlanding and high-altitude travel
Fast four-tire inflation on remote trails
Portable air tool operation
Warranty
Three-Year Manufacturer Warranty with option to upgrade to five years at checkout
Built for durability. Backed by confidence.





We value your satisfaction with Thor's Lightning Air Systems and its products. If you aren't satisfied with your product, we want to make it right.
Our refund and returns policy lasts 90 days. If 90 days have passed since your purchase, we can’t offer you a full refund or exchange.
To be eligible for a return, your item must be returned with all components that were included in the order.
To complete your return, we require a receipt or proof of purchase.
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.
Late or missing refunds
If you haven’t received a refund yet, first check your bank account again.
Then contact your credit card company, it may take some time before your refund is officially posted.
Next contact your bank. There is often some processing time before a refund is posted.
If you’ve done all of this and you still have not received your refund yet, please contact us at returns@thorslightning.com.
Sale items
Only regular priced items may be refunded. Sale items cannot be refunded.
Shipping returns
To return your product, you should mail your product to: 419 Adams Ave #1, Albert Lea, MN 56007
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you may vary.
If you are returning more expensive items, you may consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
Need help?
Contact us at returns@thorslightning.com for questions related to refunds and returns.
Duration: 3 years from the date of purchase by the original Purchaser.
Limited Warranty:
- Who gives this warranty (Warrantor): Thor’s Lightning, LLC, 419 Adams Ave #1, Albert Lea, MN 56007. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- What products are covered by this warranty: Thor’s Lightning Air System tire pressure inflation/deflation/equalization device and/or Thor’s Lightning Compressor Mounting Bracket and/or Thor's Lightning Air Compressors.
- What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- What is not covered under this warranty:
- The cost of labor to make repairs or replacements
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- Any damage caused by using equipment beyond rated capacity and/or capability
- Items or service normally required to maintain the product.
- Items considered general wear parts such as hoses, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating equipment under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Any component failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Worn components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of a Thor’s Lightning product
- Responsibilities of Warrantor under this warranty: Repair or replace with either new or reconditioned unit at Warrantor’s option, component and/or unit which is defective, has malfunctioned and/or failed to conform within duration of the warranty period.
- Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records
- Freight costs must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
- When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
Limitation of Liability: Thor’s Lightning shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other than an authorized representative of Thor’s Lightning has made any attempt to service or modify the tool prior to its return to Thor’s Lightning under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages Thor’s Lightning products are provided and sold as is without any express or implied warranties including warranties of merchantability or fitness for particular purpose. No warranties, expressed or implied, will apply after this period. Thor’s Lightning may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on Thor’s Lightning website. Such revised terms shall be effective thirty days from the date of such written notice or posting.
Setup & Support
Find quick-start instructions, installation videos, troubleshooting help, and product support for your Thor’s Lightning air system.
What do you need help with?
Choose your product below. Each section includes a video, simplified steps, and key setup notes.
Lightning Strike Compressor
Operation, TotalControl mode, manual mode, and error codes.
View Compressor InstructionsHammer Manifold
TotalControl Hammer Manifold inflation and deflation instructions.
View Manifold InstructionsMounts & Bed Rack
JKU compressor mount and Refuge Modular Bed Rack install videos.
View Install VideosLightning Strike Compressor
Compressor ManualQuick Start
- Connect the air hose to the compressor using the quick-connect fitting.
- Connect the Thor’s Lightning Dynamo chuck to the valve stem.
- Connect the power clamps to the vehicle battery and start the engine.
- Set desired pressure using the “+” or “–” buttons, then wait for the display to stop blinking.
- Press the power button to begin inflation. The compressor will stop automatically at the preset pressure.
Operating Modes
TotalControl™ Mode
Manual Mode
Normal Pausing
Error Codes
Allow the compressor to cool before restarting.
Check hose, fittings, and valve connection.
Input current is greater than 120A. Check power connections and load.
Pressure is greater than 155 PSI. Reduce pressure and restart.
Sensor may be loose or damaged. Contact support.
Sensor may be loose or damaged. Contact support.
Input voltage is greater than 16V. Check vehicle electrical system.
Input voltage is lower than 12V. Start engine or check battery.
Installation & Product Videos
Watch the correct video for your product before installation or use.
Jeep Wrangler JKU Compressor Mount
Mount InstallBefore You Start
- Confirm you have the correct mount for your Jeep Wrangler JKU.
- Lay out all hardware before beginning installation.
- Watch the full video once before tightening final hardware.
- After installation, verify the compressor and mount are secure.
Refuge Modular Bed Rack
Bed Rack InstallInstall Notes
- Identify all rack components and hardware before assembly.
- Loosely install hardware first, then square the rack.
- Tighten hardware evenly once everything is aligned.
- Recheck hardware after your first drive.
Hammer Manifold
Manifold InstructionsTotalControl Hammer Manifold
To Inflate
- Connect the controller to an air source.
- Connect the controller to the tire hoses.
- Power on and set desired PSI with “+” or “–”.
- Open the manual valve and start the air source.
- The unit may pause during calibration.
- When target PSI is reached, turn off the air source and disconnect.
To Deflate
- Connect the controller to the tires without connecting an air source.
- Power on and set desired PSI.
- Open the manual valve to begin deflation.
- The controller will stop once target PSI is reached.
- Close the valve and disconnect hoses.
Rapid Multi-Tire 4-Tire System
Inflation / DeflationRapid System Basics
To Deflate
- Unpack and orient hoses so the manifold is accessible.
- Connect hose sections to the manifold couplers.
- Connect tire chucks to valve stems and avoid hose kinks.
- Open the valve to deflate, then close to check pressure.
- Leave connected for 10–15 seconds with valve closed to equalize pressure.
To Inflate
- Unpack and orient hoses so the manifold is accessible.
- Connect hose sections to the manifold couplers.
- Connect tire chucks to valve stems and avoid hose kinks.
- Connect manifold coupler to the air source.
- Open the valve before turning on the air source.
- Inflate, then turn off air source to check pressure as needed.
- Leave connected for 10–15 seconds with valve closed to equalize pressure.
Need Help?
If you have a problem, contact Thor’s Lightning directly before returning your product to the retailer. We’ll help you get it solved faster.